Open Two Roll Rubber Mixing Mill Desktop Type 0.3kg Mixing Capacity SUS304 Stainless Steel Hopper
Rubber Two Roll Open Mill Equipment Summary
Mini type mixing mill suitable for small capacity plastic industry polymer material mixing and processing such as, PVC, color master batch. Making the raw material and compound mixing, and achieve the required color and quality. The machine adopts special heated mold, roll surface temperature uniformity, never take off a layer, sample thickness can be mixed, the machine safety protection device, convenience to use.
Open Rubber Mixing Mill Technique Feature:
1.The core technology from Taiwan, The main parts adopt the French schneider.
2.Water-cooled, surface temperature by water cycle at room temperature - water temperature, at the same time temperature uniformity
3.Roll adopts the vanadium titanium alloy chilled cast iron,roll hardness(HRC)50-60,surface is hard wear-resisting, durable. Roller lumen finish machining to ensure that the roller body cooling quickly and evenly.
4.The machine adopts manual adjustment mode, Thickness control precision,easy operation,High safety factor . The machine is equipped with an emergency brake, When emergency accidents,four corners have emergency switch, a number of brake system, convenient quick stop machine
5.Transmission device adopts hardened reducer,compact structure,transmission efficiency,little noise.
6.Automatic oiling device to ensure that long-term oil for driving part,Make up the pump forget supply damage to part of serious consequences.
7.Two motor driven,arbitrary roller speed ratio before and after implementation,easy to operation；
8.Integral plate,easy installation.Driving mode is uniaxial output to ensure the big torque,imported bearings to reduce friction to save electricity, reduce noise, and Rubber thickness uniform parallel controllable.
9.Transmission device adopts double double frequency converter control,Low noise, long service life.
Standard
HG/T 3108-199 Applicable Industry Rubber,Silicone, plastic etc.
Applicable Industry :Rubber,Silicone, plastic etc.
Rubber Two Roll Open Mill Technical Parameters
|
Model Number
|
HZ-7015
|
|
Temperature uniformity
|
1.5℃
|
|
Filling device
|
SUS 304 Stainless steel hopper
|
|
Roller Diameter
|
60mm/2.5inch
|
|
Roll surface width
|
200mm
|
|
Mixing capacity
|
0.1~0.3kg
|
|
Roller temperature
|
Normal temperature / normal temperature-250℃
|
|
Power of motor
|
750W*1
|
|
Roller ratio adjusted
|
1:1.25
|
|
Roller hardness
|
50～60HRC
|
|
Roller speed
|
10-40r/min
|
Your message must be between 20-3,000 characters!
